Subaru 5 speed Shift Knob w/ shift boot holder - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Subaru 5 speed Shift Knob w/ shift boot holder

0 downloads45 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a shift knob for any 5 speed manual Subaru's or any vehicle with a M12x1.25 thread. I also added on the original shift boot adapter piece from the oem shift knob to hold the leather boot to the shift knob. Also includes a simple shift pattern on the top. The dimensions are 97.4 mm tall, 50 mm diameter tapering down to a 33.64 mm diameter at the bottom. The internal thread length is 26mm. I plan on re-designing this shift knob but with the capability to add weights to the shifter. I also recommend finishing the knob by sanding/painting or any other methods for the best look. Any tips are appreciated. Thanks.