Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Subaru Badge

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a badge made so that it can be filled with clear acrylic and attached to rally car trailer. Designed using Solid Edge and then saved as STL. Must try and save on the right planes as when converting to STL format it needs turning. Logo might not be spot on but is close for what I was after. I print the base layer and then change filament to other color as using dual head printing is not as clean as I would like but still working on that.