Files (1)

SubaruCenterCap.stl

STL

180.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
SubaruCenterCap.stl	Cover / cap	180.7 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Subaru Center Cap

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Remixed from the blank centercap published by darkstrike. I added a outer face that is 58mm to fit a 2005 Subaru Legacy GT, changed the diameter of the tabs, and added the Subaru text. I also had issues with the tabs breaking off so I reworked the way that the tabs connect to the faceplate by stretching the z axis and placing a cylinder inside to support them.