Files (1)

Coolant_line_clip.stl

STL

141.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Coolant_line_clip.stl	Clip	141.0 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for stability if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Subaru coolant line clip

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Coolant clip for the 12 and 15mm coolant lines. If you've replaced the standard air filter lid with an aftermarket air filter, the two coolant lines have nowhere to attach. These clips will keep them tidy! I printed them in PETG but these lines don't get particularly warm and aren't under and tension so PLA would probably be fine.