Files (2)

subaru_shifter_bushing_ends.stl

STL

111.4 KB

subaru_shifter_bushing_middle.stl

STL

150.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

29g

Based on 25% main infill across listed model files

Material cost

$0.69

Filament only at roughly $24/kg PETG / ASA

Print time

49m–1.4h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
subaru_shifter_bushing_ends.stl	Printable file	111.4 KB STL	13g $0.30	14g $0.33	30g $0.72	Ensure proper orientation in the slicer for optimal printing
subaru_shifter_bushing_middle.stl	Printable file	150.1 KB STL	14g $0.33	15g $0.36	33g $0.79	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Subaru shifter selector bushing

1 downloads88 views0 likes

Shared by

Alfred

Verified

Description

bushing for shifter selector. these are designed for the narrow shifter for 2002 subaru wrx impreza. If you have the wider shifter then extend the middle bushing. Middle bushing isn't needed however I made it for additional support to reduce wear on ends. make sure to print 2 ends.

Compatible Cars

Subaru (all models)

Published Jun 30, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Keenan Chinnuke (keenanc1) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.