Files (1)

IntakePlug.stl

STL

76.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
IntakePlug.stl	Primary model	76.5 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Subaru Legacy Air-Box Plug

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Fans of the 4th-Generation Subaru Legacy and Outback sometimes like to remove the resonator from the bottom of the stock air intake box, because you can hear the turbocharger more clearly, and you get a little bit more growl at full throttle. However, that creates a pathway for grime to get into the filter. So after buying a car with a de-resonated intake box, I wanted to plug that hole.