Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | ASA / PETG 20% | ASA / PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| FPR_Bracker_v1.stl | Primary model | 333.9 KB STL | Slice file | Slice file | Slice file | Ensure proper bed adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Subaru Legacy Radium Fuel Pressure Regulator Bracket
Shared by
3DPrintedCarPartDescription
This bracket is for replacing the OEM pulse dampers and fuel pressure regulator with higher performance Radium Engineering peaces. The '05-'06 Legacy GT has a partial dead head fueling system similar to the GR STI, leading to rather annoying fuel pressure fluctuations particularly after upgrading injectors. Development and supporting information on LegacyGT.com Requires: Radium Fuel Pressure Regulator 20-0010-00 Radium FPD-R Earls 785056ERL Earls 759156ERL Optional: Grimspeed Master Cylinder Brace Radium Fuel Pressure Gauge 1/8 ntp 0-100PSI fuel pressure sender wired to TGV input Fits '05-'06 Subaru Legacys. Was designed for the Grimmspeed Master Cylinder Brace, but should mount to the OEM lower bracket as well. This V1 bracket has a lot of stress risers making it extremely susceptible to warping. A redesign is coming that will eliminate these issues.
Compatible Cars
Originally published on thingiverse.com by Walter Hooper IV (wehooper4) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
