Files (4)

End_Cap_Side-LH.stl

STL

1.9 MB

End_Cap_Side-RH.stl

STL

1.9 MB

Return_Spigot_repaired.stl

STL

823.8 KB

Vac_Tee.stl

STL

242.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
End_Cap_Side-LH.stl	Cover / cap	1.9 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
End_Cap_Side-RH.stl	Cover / cap	1.9 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
Return_Spigot_repaired.stl	Printable file	823.8 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing
Vac_Tee.stl	Printable file	242.0 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Subaru EA81 Replacement Parts

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Collection of Subaru Replacement Parts, mostly for Brumby & EA81 Models... Completed parts: + Indicator Cancelling Sleeve: Return Spigot ( First Draft ) + Brumby Tray Chrome Trim End Caps: ( L & R Side ) + Vacuum Tee ( First draft ) + Badges: http://www.thingiverse.com/thing:1065522 + Centercap Retaining Ring: http://www.thingiverse.com/thing:1024984 Those yet to be finished: + Center cap to suit 65mm opening: ( Work in Progress ) + Inner Door Handle Surrounds: ( Have got to find a good example ) + Speaker Surround: ( Work in Progress ) Some laser etched parts: + Brumby Telltale: ( for those without 4wd & Lo ) + Brumby Status: ( working on this ) & some other parts ( not made by me ): + Sun Visor Clip: http://www.thingiverse.com/thing:967539 + Speedometer Needle: https://www.thingiverse.com/thing:2098945 + Side Trim Clip: https://www.facebook.com/groups/subarubrumbybrat/permalink/10158995291463973/ ( More to Add here ) Will add more as I find them...;) Cheers, Bantum...