Files (2)

CE3_subaru_headlight_washer_cover_curved.stl

STL

7.9 MB

CE3_subaru_headlight_washer_cover_flat.stl

STL

19.4 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Typical selected file

116g

Based on 25% main infill for the largest likely-needed model file

Material cost

$2.78

Filament only at roughly $24/kg PETG / ASA

Print time

3.3h–5.5h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
CE3_subaru_headlight_washer_cover_curved.stl	Cover / cap	7.9 MB STL	70g $1.68	76g $1.82	166g $3.99	Use PETG / ASA; check sealing faces and verify in slicer.
CE3_subaru_headlight_washer_cover_flat.stl	Cover / cap	19.4 MB STL	107g $2.56	116g $2.78	254g $6.10	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Subaru headlight washer cover

1 downloads80 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Two versions - flat (easy printing) and curved (as the original part). Catalog note: Subaru headlight washer cover is a 3D-printable car-part listing indexed for classified fitment Subaru. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.