SUBARU Forester 2015 bottle insert - image

Files (3)

dual_color_-_body.stl

STL

1.3 MB

dual_color_-_logo+text.stl

STL

321.8 KB

SUBARU_Forester_2015_bottle_insert.stl

STL

1.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
dual_color_-_body.stl	Printable file	1.3 MB STL	Slice file	Slice file	Slice file	Print with a brim for stability
dual_color_-_logo+text.stl	Printable file	321.8 KB STL	Slice file	Slice file	Slice file	Print with a brim for stability
SUBARU_Forester_2015_bottle_insert.stl	Printable file	1.2 MB STL	Slice file	Slice file	Slice file	Print with a brim for stability

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

SUBARU Forester 2015 bottle insert

0 downloads129 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Bottle insert SUBARU Forester 2015 I like to place my drinking bottle in de center console rather than in the door. The problem is that it is designed for cans, and not for 500ml bottles. What happens is that in corners the bottle tips over and spills. With this insert that problem is over. Print it with ABS, PLA is not good enough and becomes soft on a hot summers day.