Subaru Forester Speaker adapters (SG 2002 - 8) - image

Files (2)

front.stl

STL

402.5 KB

rear.stl

STL

350.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
front.stl	Printable file	402.5 KB STL	Slice file	Slice file	Slice file	Check speaker clearance before printing
rear.stl	Printable file	350.9 KB STL	Slice file	Slice file	Slice file	Check speaker clearance before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Subaru Forester Speaker adapters (SG 2002 - 8)

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed these to enable me to fit aftermarket speakers in my 2004 Forester. I fitted (rear) 5.25" and (front) 6.5" Fli speakers (sound much better). (theres a few similar designs on thingiverse if these are not exact for your needs) Rears are only 7mm thick - check new speaker clearance - the ones I fitted just touched the grill/panel. Front are 12mm thick and enabled my Fli speakers to clear the window when wound down, and easily cleared the grill./panel - so you could always scale the thickness up a little in your slicer to increase clearance at the window glass if needed. Print in ABS to prevent warping in heat (PLA should be fine though I guess). Photo only shows rears (I forgot to take photos of the fronts!) - same idea for the rears.