Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 10% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Thru Axel Fork Mount For Center Head Rest Subaru Forester
Shared by
3DPrintedCarPartDescription
Simple fork mount for a 12x100 thru axel to mount on the center headrest of a ~2010 Subaru Forester or similar. (10mm headrest posts 95mm spacing) **Update: loosened tolerance a little on the headrest portion. Apparently 40+ people downloaded this thing in the first few hours while I had it printing. That's crazy. Let me know if the axel tube needs to be loosened a bit Print with quite a few walls and some decent infill obviously. 5 walls/20% triangles was a decent but could be a bit better I think.
Compatible Cars
Originally published on thingiverse.com by Zachery Marsh (Cyclimbo) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
