Files (1)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Subaru_Shift_Boot_Attachment_v4.stl | Primary model | 735.8 KB STL | 25g $0.59 | 27g $0.64 | 59g $1.41 | Ensure a strong adhesion to the build plate to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Subaru Manual Shift Boot Attachment
Shared by
3DPrintedCarPartDescription
When my father passed away he left me a pile of nice wood. One of the pieces was extremely hard, and I had it made into a custom shift knob. The only problem is Subaru shift knobs have this little plastic piece on the end which attaches the boot cover to the shift knob. If you want to DIY a shift knob, just screw this piece onto the shifter before the shift knob, and adjust so the adapter and the shift knob are next to each other. Then drag the boot over the plastic lip, and that holds it in place.
Compatible Cars
Originally published on thingiverse.com by 3DUpfitters (czei) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
