Files (1)

WRX_SHIFT_KNOB_STEM.STL

STL

130.7 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

14g

Based on 25% main infill across listed model files

Material cost

$0.35

Filament only at roughly $24/kg PETG / ASA

Print time

25m–41m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
WRX_SHIFT_KNOB_STEM.STL	Primary model	130.7 KB STL	13g $0.32	14g $0.35	32g $0.76	Ensure the model is oriented to minimize supports, if needed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Subaru Shift Knob

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Basic Subaru shift knob to replace the original factory knob. Holes for set screws would need to be placed around the stem to hold in place. made to attach leather boot to bottom of the stem.

Compatible Cars

Subaru WRX

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by JEREMY NEWMAN (jeremyxcii) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.