WRX Billiard Ball Gear Knob Spacer - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

WRX Billiard Ball Gear Knob Spacer

0 downloads59 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

To get a new billiard ball gear knob to fit the gear stick in our Subaru WRX (2006) model, it needed a spacer adapter. The spacer also needed the incorporation of a ridge for the boot sleeve, too. I designed a 3D part to created the spacer part. The inside thread is DIN Pipe Thread 13.157mm. The outside thread is ISO Metric profile M18 x 1.5mm. My print is made in PETG 1.75mm Aurarum black filament, with 0.2mm layer height and 100% infill on a PRUSA I3 MK3S printer. I hope you can find this print useful, too. Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.