Subaru Steering Rack Mount Bushing - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 90%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Subaru Steering Rack Mount Bushing

0 downloads37 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

When crappy Whiteline steering rack mounting bushes failed on the very second lap of a track day I decided to replace them with with 3D printed ones! I replaced these 3D printed ones with new Superpro bushes after 2000km, but the 3D printed ones showed no sign of melting, warping or wear of any kind even after this distance travelled. Do this at your own risk- if you don't understand the loads and forces involved then don't use them, and I wouldn't trust them long-term, but they are a good stop-gap while you wait for 'real' bushings! These are designed to use the whiteline crush tubes in the centre. 4 bush halves are required per steering rack. These will fit Gen 4 Liberty/Legacy, as well as GD and GR Impreza, plus likely many others.