Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Subaru strut brace bracket

0 downloads42 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I needed a place to mount an aftermarket fuel pressure regulator in my Subaru Legacy GT, so I installed a strut brace and printed this bracket. You can find these strut braces on ebay from a few different vendors for about $50 in raw aluminum or $100 with a carbon fiber wrap. Note that the bracket is actually sized for a strut brace that is wrapped in carbon fiber (yay bling!) but it works well enough on the raw aluminum brace as well.