Subaru WRX STi Turbo Bypass Adapter Flange - image

Files (1)

Subaru_Turbo_Flange_adapter.stl

STL

793.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 25%	100% solid	Recommendation
Subaru_Turbo_Flange_adapter.stl	Primary model	793.9 KB STL	Slice file	Slice file	Slice file	Print with the mounting side facing up for optimal internal mounting surface finish

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Subaru WRX STi Turbo Bypass Adapter Flange

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a flange adapter designed to adapt from Subaru's stock bypass fitting to a standard nipple. Notes: ABS is recommended for this application, and so the flange was designed to print with ABS shrinkage in mind. I would print the flange with the mounting side facing up (to control for internal mounting surface finish).