Sunglasses clip holder for Tesla Model X - image

Files (1)

sunglasses-holder-model-x_v5.stl

STL

101.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
sunglasses-holder-model-x_v5.stl	Mount / bracket	101.1 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Sunglasses clip holder for Tesla Model X

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I wanted a place to keep my sunglasses in my 2020 Tesla Model X. These clip on right above the driver and front passenger's heads and hold them in place even during strong acceleration/deceleration. Printed in Prusament PETG, 0.3mm layers, no supports. I doubt these would work well in PLA since they need to be a little bit flexible in order to get the glasses in and out of the clip.