Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 25% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg PETG / ASA

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla Model X/S CCS Adapter Holder

0 downloads30 views0 likes

Shared by

Verified

Description

Two STLs out of a community activity of the TFF Germany. (https://tff-forum.de/t/ccs-adapter-mist-wo-ist-der-schon-wieder/93928/16?u=endurance). The intention is to place the CCS adapter for the Model S&Y where you can easily grab it. Holder can be placed in the trunk or frunk mounted via velcro.

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Olaf Krause (endurance1968) · License: CC BY-NC

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.