phone_holder.stl

STL

1.5 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

37g

Based on 25% main infill across listed model files

Material cost

$0.88

Filament only at roughly $24/kg PETG / ASA

Print time

1.0h–1.7h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
phone_holder.stl	Mount / bracket	1.5 MB STL	34g $0.81	37g $0.88	80g $1.93	Ensure the M8 screw is securely attached to the phone holder arm

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Suzuki Jimny GJ (Sierra) mobile phone holder

0 downloads31 views0 likes

Shared by

Verified

Description

Holder for 17 mm sphere phone holder. A M8 screw is required for mounting the arm.

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Axel Kark (AlwaysHollow) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Finding specific fitment/category matches first.