Suzuki Jimny JB64/JB74 Phone Holder - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Suzuki Jimny JB64/JB74 Phone Holder

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

My Huawei P30 didn't fit in the storage area under the USB port when connecting to my JB74W Jimny for Android Auto as the phone was too long. I came up with a simple slot-together setup that hooks onto the front of the storage area and holds the phone nicely. To prevent movement of the phone or any tapping or rattling, I have since used the adhesive felt pads that you put under the feet of furniture, cut it up and attached it to any contact points. STP files included in case anyone needs to adjust the dimensions of the holder to match their phone. Prints nicely with 2x hooks and 1x bar at the same time. Enjoy!