Files (1)

Suzuki_Speedo_Drive_Plug.stl

STL

527.1 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

23g

Based on 25% main infill across listed model files

Material cost

$0.56

Filament only at roughly $24/kg PETG / ASA

Print time

40m–1.1h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Suzuki_Speedo_Drive_Plug.stl	Primary model	527.1 KB STL	22g $0.52	23g $0.56	51g $1.24	Use a moderate print speed for optimal layer adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Suzuki Speedometer Gearbox Plug

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Installed a TrailTech Vapor onto my Suzuki DRZ-400S (technically it's a Kawasaki KLX-400SR, but same difference), and needed a way to plug the open hole in the speedo drive gearbox on the front axle. The kit for the TrailTech supposedly came with one, but either I lost it or never received one. Anyways, whipped up this plug to keep the gunk out of the gearbox. Use the o-ring off of your speedo drive cable on this plug to get a good seal.

Compatible Cars

Suzuki (all models)

Published Jun 30, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Jason Chall (pbzJ) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.