Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Suzuki Swift Ignition Switch

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Replacement Suzuki Swift ignition switch. Print with supports. Remove supports and clean up print. Optional, fill in letters with paint. Use persuasion to install new switch. Test by inserting physical key and turning the switch. If the switch doesn't turn with the key it it might not yet sit on the barrel far enough. You might have to use a hammer to gently tap it further in place. Excessive force could damage the ignition barrel. I won't be held liable far any damage that may occur. Install at your own risk.