T Shifter/Knob, M10x1.25 Threads - image

Files (2)

T_Shifter.stl

STL

1.0 MB

T_Shifter_Supports.stl

STL

2.6 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
T_Shifter.stl	Printable file	1.0 MB STL	Slice file	Slice file	Slice file	Ensure proper threading for M10x1.25 compatibility
T_Shifter_Supports.stl	Printable file	2.6 MB STL	Slice file	Slice file	Slice file	Ensure proper threading for M10x1.25 compatibility

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

T Shifter/Knob, M10x1.25 Threads

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

M10x1.25 T shift knob for my 1998 Ford Escort. This will fit any lever threaded for M10x1.25. It is a Hurst styled shifter, which feels great, and screws on tight. The length of the threaded bit is 22-23mm. It's not meant to be completely gripped when shifting, but to just be pulled/pushed with your fingers and palm, respectively. Added the model with the supports I used. These supports have.4 mm tips, so I'm not sure if they would work with a.5 mm nozzle, or.2 mm nozzle.