Files (1)

tablet_mount1.stl

STL

83.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tablet_mount1.stl	Mount / bracket	83.6 KB STL	Slice file	Slice file	Slice file	Ensure a secure fit on the birch plywood backing plate

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

tablet_mount

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I decided to try using a tablet as a navigation system in my jeep wrangler. As this was an experiment, I didn't want to drill a bunch of holes in the dash. These corner mounting pieces are bolted (6-32) to a rectangle of 3mm birch plywood to securely hold the tablet. The plywood backing plate is then hung off two metal brackets that are secured to the dash via two of the hidden radio mounting screws. Power is supplied from the lighter socket via a usb charging plugin and charging cable. To access the mounting screws, one needs to remove the top dash cover over the radio by prying up on the edge of the cover closest to the windshield. There are 2 clips holding it in place and when released, the cover will hinge up and can be easily removed. There is a compass sensor with wiring mounted on the bottom of this cover, so take it easy when removing the cover.