Tacoma/4Runner LCD sPod Mount for Center Overhead Glasses Console - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Tacoma/4Runner LCD sPod Mount for Center Overhead Glasses Console

0 downloads44 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

LCD sPod mount for the Center Sunglasses Console. This is designed to be glued/adhered to the fold down glasses storage. An RJ45 Keystone is also embedded to allow you to mount an RJ45/Cat5 plug directly to the cover to pass through the communications cable rather than feeding a wire through the unit and to the back. Making it a much cleaner looking install that allows you to also remove the whole unit quicker. NOTE: The photos of the gray model are of Version 1, Version 2 should produce a more flush mount for the screen as I forgot to account for the ethernet plug depth.