Tacoma camera display dash mount - image

Files (1)

Tacoma_bracket_-_display_mount.stl

STL

247.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tacoma_bracket_-_display_mount.stl	Mount / bracket	247.3 KB STL	Slice file	Slice file	Slice file	Ensure a sturdy build plate adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Tacoma camera display dash mount

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A Toyota Tacoma dashboard bracket that fits the ball mount from a 5" camera display. It fits a 2022 but should work on any 3rd gen Tacoma. I printed in PETG but PLA might be strong enough, the bracket body is thick and sturdy. I added some small strips of neoprene with double sided tape to the contact points to keep the bracket from sliding on the dash.