Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Tacoma Gen2 Dash Blank
Shared by
3DPrintedCarPartDescription
Dashboard button blank for Toyota Tacoma Gen2. This part is basically made to exactly reproduce the factory blank. Please beware that printing along the top/bottom will make the prongs very fragile. I would recommend either: * placing one of the "sides" on the print bed (assuming your print will not sag or curl) * printing in multiple pieces. The prongs will be pushed inward when inserted into the Tacoma dash. So if you print the button along the top/bottom, the prongs will shear along the layer lines (i.e. it will break very easily).
Compatible Cars
Originally published on thingiverse.com by James Beadsworth (Beadsworth) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
