Files (1)

tacoma_radio_plate.STL

STL

126.3 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tacoma_radio_plate.STL	Primary model	126.3 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Tacoma radio block off plate

0 downloads47 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I'm doing a radio delete on my 2005 tacoma and wanted a block off plate. Reuse the yellow plastic holding clips that are on the original faceplate and put them on the new mounting points. This will reuse the hazard light/ clock combination. i imagine if you wanted to modify it for a radio it would work pretty well. it's 2MM thick all the way.