Files (1)

Taco_rear_view_mirror_clip.stl

STL

161.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Taco_rear_view_mirror_clip.stl	Clip	161.2 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

Tacoma rearview mirror clip

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A simple clip that holds sunglasses above the rear view mirror. It will attach tightly to the top of the rear view mirror on a 3rd gen Tacoma. I don't know if it will fit another generation or another vehicle, the distance between the mirror mount slot and the front edge determine the fit.