Files (1)

f650_blank_v6_pair.stl

STL

1.3 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
f650_blank_v6_pair.stl	Primary model	1.3 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

tail blanks for BMW vehicles

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

When you remove the tail rack on a BMW F650, there are these two holes left in the bodywork. This is my attempt to cover those. The challenge with 3D printing these is getting the "upright" angle just right. You've got to trade off making the posts (they want to be straight up or down) while keeping the outer shell still cosmetically acceptable. L & R sides are mirrors of each other.