Tesla 3 / Y Console Tray from 2021 models onwards / Konsole Ablagefach ab Modelljahr 2021 preview

Files (1)

Tesla Console Tray with Logo.stl

STL

55.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Tesla Console Tray with Logo.stl	Primary model	55.9 KB STL	Slice file	Slice file	Slice file	Verify orientation and support needs in your slicer before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla 3 / Y Console Tray from 2021 models onwards / Konsole Ablagefach ab Modelljahr 2021

0 downloads20 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports unlikely

Infill

20-30% infill for durability, with 2-3 walls for strength

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY-SA

Commercial use allowed

Attribution required

Safety/IP review

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

It's a remix of 'zrides' "Tesla Model 3 Center Console Tray -- 2021 I have made my remix a bit longer so that sunglasses fits inside, as well as a wallet next to it. The tray can still be easily pushed back, allowing access to the lower storage area. Furthermore, I have designed two different models: one with a logo and one without a logo. Those who wish to print everything in carbon fiber style like me will need the model without the logo. The TPU inserts can be printed individually and fit both models. For the model with a carbon-fiber surface, you can print the logo, frame, and TPU inserts individually on a structured build plate with the correct alignment already set. This allows for convenient printing and assembly. I printed all the parts in PETG, except for the TPU inserts, which are, of course, made of TPU material. The best part is that no support is required for the printing process. ______________________________________________________________________________________________________________ Ich habe meinen Remix etwas verlängert, damit eine Sonnenbrille längs hineinpasst, sowie ein Portemonnaie daneben. Das Tray kann immer noch problemlos nach hinten geschoben werden, um Zugang zum unteren Stauraum zu ermöglichen. Außerdem habe ich zwei verschiedene Modelle entworfen: eins mit Logo und eins ohne Logo. Wer alles in Carbon-Optik drucken möchte wie ich, benötigt das Modell ohne Logo. Die TPU-Einsätze können einzeln gedruckt werden und passen in beide Modelle. Für das Modell mit Carbon-Oberfläche können das Logo, der Rahmen und die TPU-Einsätze einzeln auf einer strukturierten Bauplatte mit bereits korrekter Ausrichtung gedruckt werden. Das ermöglicht einen bequemen Druck und Zusammenbau. Alle Teile habe ich aus PETG gedruckt, außer den TPU-Einsätzen, die natürlich aus TPU-Material sind. Das Beste ist, dass kein Support für den Druck benötigt wird.