Tesla Model Y (2021) Sunglasses Holder - image

Files (1)

sunglassholder.stl

STL

39.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
sunglassholder.stl	Mount / bracket	39.7 KB STL	Slice file	Slice file	Slice file	Print with a brim for stability

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla Model Y (2021) Sunglasses Holder

0 downloads68 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Based loosely on the original file. Had to remake it fully. The headliner for the 2021 Model Y changed (very likely for the 2021 Model 3 as well) so the old version of this no longer works. Added sharper ends to make getting it into the headliner easier. Printed in ABS to prevent sagging in SoCal heat. I printed 2 of them to allow for the spacing to be adjustable to prevent rattling.