TesHook-large.stl

STL

371.1 KB

TesHook-small.stl

STL

391.3 KB

TesPlug.stl

STL

4.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TesHook-large.stl	Printable file	371.1 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for improved adhesion
TesHook-small.stl	Printable file	391.3 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for improved adhesion
TesPlug.stl	Printable file	4.1 MB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for improved adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Tesla Cable Holder

0 downloads35 views0 likes

Shared by

Verified

Description

https://www.youtube.com/watch?v=q8S2gsGobI0 In this project we’ll show you how we designed and 3d printed a mount for our Tesla charging adapter. We didn’t want to drill any hole into the wall so we designed it to clip onto our shelves and it also doubles as a cable organizer. Read the full guide on: https://learn.adafruit.com/3d-printed-tesla-cable-mount/