Tesla charger adapter holder for Model 3 trunk - image

Files (1)

charger_adapter_holder.STL

STL

340.1 KB

Print guidance estimate

Uses saved filament metadata

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
charger_adapter_holder.STL	Mount / bracket	340.1 KB STL	46g $1.10	50g $1.20	110g $2.63	Mounts to one of the plastic push pin clips in the trunk

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Tesla charger adapter holder for Model 3 trunk

0 downloads152 views0 likes

Shared by

Michael Chen

Verified

Description

Utilize one of the plastic push pin clips in the trunk to mount this holder for the charging adapter. I printed in ABS at 20% infill, no supports necessary. How to install: https://youtu.be/SD9FAFNJass Newer Model 3s may not have the push pin, but you can still install in that location, details here: https://youtu.be/WfFdlGZh1fw