Files (2)

tesla_cord_wrangler.stl

STL

70.7 KB

tesla_cord_wrangler_v2.stl

STL

88.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
tesla_cord_wrangler.stl	Printable file	70.7 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for improved adhesion
tesla_cord_wrangler_v2.stl	Printable file	88.6 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for improved adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla Cord Wrangler

0 downloads24 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The Tesla Cord Wrangler is meant to accompany the plug holder and the large wall hook created by jbishop129. This is basically his large wall hook doubled to make a sort of u-shaped holder. There are two versions included.