Files (9)

Full_Build.stl

STL

4.4 MB

TEST_Cross-support.stl

STL

532.0 KB

TEST_Full_Plate_Bottom.stl

STL

836.4 KB

TEST_Full_Plate_Top.stl

STL

446.0 KB

TEST_Left_Bracket_FDM.stl

STL

741.6 KB

TEST_Left_Bracket_inside.stl

STL

256.8 KB

TEST_Plate_Cross-support.stl

STL

529.4 KB

TEST_Right_Bracket_FDM.stl

STL

745.3 KB

TEST_Right_Bracket_inside.stl

STL

249.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

9 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Full_Build.stl	Printable file	4.4 MB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for outdoor use
TEST_Cross-support.stl	Printable file	532.0 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for outdoor use
TEST_Full_Plate_Bottom.stl	Printable file	836.4 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for outdoor use
TEST_Full_Plate_Top.stl	Printable file	446.0 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for outdoor use
TEST_Left_Bracket_FDM.stl	Choose left variant	741.6 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
TEST_Left_Bracket_inside.stl	Choose left variant	256.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
TEST_Plate_Cross-support.stl	Printable file	529.4 KB STL	Slice file	Slice file	Slice file	Ensure proper layer adhesion for outdoor use
TEST_Right_Bracket_FDM.stl	Choose right variant	745.3 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
TEST_Right_Bracket_inside.stl	Choose right variant	249.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

TESLA Front License Holder

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a slight redesign to fit the Model Y. It's still a work in progress, but I wanted to post it for others to improve on. Update - I'll need to trim about 3 1/2 inches off the length, will upload new files of the shortened parts shortly after printing and testing. I've left up the parts that are currently untouched.

Compatible Cars

Tesla Model Y

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Richard C (Poncherelly) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files