Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Tesla Gen 2 Wall Connector Low Profile Bracket

0 downloads30 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is the low profile bracket for The Gen 2 Tesla Wall Connector. If you don't have the original screws anymore, you'll need 4 screws to secure the bracket to the wall connector. I'll have to measure mine, but they are standard M# screws (~M3 and M6, for example). Secure the bracket to the wall with some lag bolts.

Compatible Cars

Tesla (all models)

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Tim Nguyen (otdiggity) · License: CC BY-NC-ND

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.0K

License: CC BY

View & download STL files