Files (1)

Tesla_Glove_Box_Print.stl

STL

461.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Glove_Box_Print.stl	Primary model	461.4 KB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for better adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tesla Glove Compartment Shelf

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a shelf for the glove compartment of a Tesla Model S to help keep things organized. It is wide enough to allow space for the charging adapter at the end. It basically allows you to keep sunglasses and other items away from paperwork and placards. Constructive suggestions for improvement are welcome. Note: I have learned that the original design developed a sag over time. I have made some changes which I hope will minimize that problem. The new model was uploaded on 11/10/17.