Hooks for Model X or Model S seat back cover - image

Files (1)

Seat_hook_v4.stl

STL

22.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Seat_hook_v4.stl	Primary model	22.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Hooks for Model X or Model S seat back cover

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My wife created some custom seat back covers for my 2020 Tesla Model X. These are the new seats with fixed head rests. To keep the covers attached, I 3D printed these small hooks. You can see them in the picture; I slide them onto the edge of the hard plastic part of the seat back, over the stretched cover, and they hold the cover in place very well. Printed in Prusament Black PETG, 0.3mm layers.