Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_Model_S_Frunk_Clips.stl | Clip | 81.4 KB STL | Slice file | Slice file | Slice file | Ensure the print bed is level and clean for optimal adhesion |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model S Frunk Liner Clip
Shared by
3DPrintedCarPartDescription
Replacement clips for a Tesla Model S that hold the frunk liner in place to the quarter panel. These are held on from the factory by adhesive strips that wear over time. Mine were practically falling off and got lost. I printed 3 as replacements and held them on using 3M double-sided foam tape. Be sure to clean the quarter panel thoroughly before applying the tape! This works for my 2014 Dual-Motor Model S. I'm unsure if different models would require a different clip!
Compatible Cars
Originally published on thingiverse.com by Tesla Ryan (OddOcelot) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
