Files (1)

Sunglass_Clip_v7_with_tip__and_bend.STL

STL

32.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Sunglass_Clip_v7_with_tip__and_bend.STL	Clip	32.2 KB STL	Slice file	Slice file	Slice file	Ensure the clip's bend and tip are oriented for minimal support material

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tesla Model S Sunglass Clip

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a sunglasses holder clip for the Tesla Model S (It may work for the Model X, I don't know?) It goes under the microphone port on the headliner area. Works fine for the few sunglasses I've put in it, but still needs some work.