Tesla Headrest Mount for Tablet/Switch - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tesla Headrest Mount for Tablet/Switch

0 downloads35 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I needed a headrest mount for my kids' various devices which actually fits the quite special Tesla headrest. This is a remix of https://www.thingiverse.com/thing:2255304 (attach to headrest) and https://www.thingiverse.com/thing:2986970 (universal tablet holder). The holders have been in use for the past 2 years now, holding everything from IPad to Switch to Books … ## Instructions (copy/pasted): Since I mainly remixed parts, best explanations can be found with the original items: ### Headrest *The tiltable version needs a M10 hex nut and a bolt.* *Needs to be printed in two/three parts, and glued together.* *Glue the vertical beam on the exact middle point of the horizontal beam.* ### Tablet Mount *It uses standard M6 bolts and nuts. It can be adjusted freely fit every rectangular piece of technology* (I added some felt-stickers to be able to make the hooks fit more tight without scratching anything)