Files (1)

Better_Cleat.stl

STL

218.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Better_Cleat.stl	Primary model	218.4 KB STL	Slice file	Slice file	Slice file	Ensure a clean and dry print bed for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Tesla Model S Dashcam Mount

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A device that clamps on to a Tesla Model S interior rearview mirror stem, and provides a flat mounting surface for a dashcam (it could also be used for radar detectors, etc.). The camera end is just a solid tongue that you can drill through to hold the camera. The clip is designed to hide the dashcam from the driver's point of view. Note: the second image is upside-down, the camera hangs below it.

Compatible Cars

Tesla Model S

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Thomas Mc (BalrogHuzzah) · License: CC BY-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.