Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla J1772 Charger Adapter Lock - Snug Fit
Shared by
3DPrintedCarPartDescription
The original is too loose and can easily be unplugged when I tried. The gap between the car allows it to wiggle enough to unlock, even with the 8mm deeper design. This is redesigned from scratch and seems to hold well. It includes the thinner latch ring area, a request on the original, and the Tesla logo. Comment if it works better for you, or if you have any other ideas. I've tried it on ChargePoint and Clipper Creek chargers.
Compatible Cars
Originally published on thingiverse.com by Eric Pheterson (epheterson) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
