Files (1)

eoSdGW8A4mU.stl

STL

646.9 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

25g

Based on 25% main infill across listed model files

Material cost

$0.61

Filament only at roughly $24/kg PETG / ASA

Print time

43m–1.2h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
eoSdGW8A4mU.stl	Primary model	646.9 KB STL	23g $0.56	25g $0.61	56g $1.34	Use Command Strips for non-permanent attachment

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Tesla MagSafe Mount

0 downloads30 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I wanted a MagSafe mount in my Model S and at the time there were no options. Things have since changed, but I like this option because it is not vent mounted. My Kenu would often fall off; same with the Belkin MagSafe. This is attached with a couple of Command Strips, and is non-permanent. All you need is an appropriate sized M3 Bolt (2 7/16 long) and nut. Recommend printing in PETG or stronger. PLA will warp in the summer. This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/eoSdGW8A4mU

Compatible Cars

Tesla (all models)

Published Jun 30, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by marty garvin (elemenope) · License: CC BY-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.