Files (4)
Based on 25% main infill for the largest likely-needed model file
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| BdscableLogo.stl | Printable file | 194.2 KB STL | 15g $0.36 | 16g $0.39 | 36g $0.86 | Print the holder and logo/letters separately for easier handling |
| Bdstesla_cable_holder.stl | Mount / bracket | 516.1 KB STL | 21g $0.51 | 23g $0.56 | 51g $1.23 | Print the holder and logo/letters separately for easier handling |
| Bdstesla_cableletters.stl | Printable file | 52.9 KB STL | 10g $0.25 | 11g $0.27 | 25g $0.59 | Print the holder and logo/letters separately for easier handling |
| Tesla_Wall_Mount.stl | Mount / bracket | 882.1 KB STL | 26g $0.64 | 29g $0.69 | 63g $1.51 | Print the holder and logo/letters separately for easier handling |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Mobile Charger & Cable Holder with Logo and Letters (US version)
Shared by
3DPrintedCarPartDescription
So I really liked the smooth lines of jakepoz cable holder. I just felt adding the Logo and Name would jazz it up a bit. So thanks to ExplodingRedCow9 for those. I recommend printing the holder separately, since it takes several hours to print. The logo and letters fit in the holder nicely, but print them at 99.5% if you need to. I hope you like this remix!
Compatible Cars
Originally published on thingiverse.com by Rob Schenk (Rps96) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
