Tesla Model 3 Aero wheel cover Storage Holder - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Tesla Model 3 Aero wheel cover Storage Holder

0 downloads39 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Keep your Aero covers scratch free when storing them. These 3D printed holders help you safely store your Tesla Model 3 "Aero" covers when you have them off your car. They are a convenient press in holder that you can mount to the wall of your garage or other vertical surface. Not intended for overhead use. Two versions are are available, depending on how you want to mount them: Hanging Hole and Smooth Back > Hanging hole: has 11 mm hole with 4 mm slot in center for mounting using a screw or other fastener (see red one in photo). > Smooth back: Use your own adhesive strip for attaching to vertical surface. I recommend 3M Command Strips or 3M VHB (permanent) tape for mounting. Warning: Please be sure to check that the surface you are mounting to is compatible with the adhesive strips before choosing that as your option. You don't want them falling onto your car! I cannot be responsible for these falling off if you choose to use an adhesive mounting option - Even if mine are installed this way:) Also - if you can't print, you can find them on my ETSY shop...