Tesla Model 3 Footwell Vent Adjuster - image

Files (2)

Footwell_Vent_Rev1_-_Part_1.stl

STL

1.0 MB

Footwell_Vent_Rev1_-_Part_2.stl

STL

84.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Footwell_Vent_Rev1_-_Part_1.stl	Printable file	1.0 MB STL	Slice file	Slice file	Slice file	Ensure proper fitment in the Tesla Model 3 footwell vent grill
Footwell_Vent_Rev1_-_Part_2.stl	Printable file	84.7 KB STL	Slice file	Slice file	Slice file	Ensure proper fitment in the Tesla Model 3 footwell vent grill

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Vents

Tesla Model 3 Footwell Vent Adjuster

0 downloads25 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Small adjustable sliding footwell vent to allow you to fully shut off (or fully open) the air vent in the Tesla Model 3 Footwell. Helps prevent you getting freezing feet when the AC is working hard but your feet are just fine! I simply ty-wrapped it to the footwell vent grill to hold it firmly in place, this way its fully removeable with no sticky tape. Not a perfect design, known areas for improvement, so feel free to enhance away!